Renovation of prefabricated buildings: historical analysis, digital model, energy retrofit. A case study in Calabria, Southern Italy
Submitted: 2024-12-26
|Accepted: 2025-04-03
|Published: 2025-05-29
Copyright (c) 2025 VITRUVIO - International Journal of Architectural Technology and Sustainability
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Downloads
Keywords:
Construction History, Prefabrication, HBIM, Energy Retrofit, South Italy, 1970s
Supporting agencies:
NextGenerationEU Mission 4, Component 2, CUP H53D23006790006
Department of Civil Engineering of the University of Calabria and ATERP Calabria
Abstract:
This paper presents some results of a current research project on the knowledge, monitoring and requalification of the light prefabricated built heritage of the second half of the twentieth century in the regions of Calabria and Lazio, funded by European Union Next Generation EU, developed by the University of Calabria and by the University of Roma Tor Vergata. In the case study presented in this paper, the research group of the University of Calabria applied the methodology used in the research project. The case concerns a public housing complex built in Cosenza (Calabria) in the 1970s. Starting from the analysis of historical documents, the HBIM model of one of the buildings was developed, and then the energy analysis was conducted. The HBIM model was developed connecting the three-dimensional visualisation of the building to archival sources, selected and organised in databases. Then, starting from the present building, with a reverse investigation process, studies, evaluations and measurements were conducted to increase the level of information on the various parts of the building, underlining that the industrialised built heritage, also if combined with parts built on site, matches contemporary digital tools. Historical analysis and HBIM support the requalification, with the definition of solutions for plant updating and energy saving, outlined in a way that is conscious of the building’s technical value.
References:
ATERP Calabria Archive (1972). Project documentation (report and drawings) relating to “Costruzioni Gescal Cosenza, via Popilia intervento n. 1138”
Barazzetta, G. (2016). Profili e problemi della prefabbricazione italiana. In: Archivio Storico Amma, Le culture della tecnica. Edizioni Amma, Torino.
Basiricò, T. (2025). Design Experimentation and Scientific Research in the 70s and 80s Industrialized Construction in Palermo. In: R. Corrao et al. (eds), Colloqui.AT.e 2024, LNCE 610. https://doi.org/10.1007/978-3-031-71855-7_3
Bertolazzi, A., Croatto, G., Savino, M., Turrini, U., Abazai, A., Santi, G. (2019). The refurbishment of of prefabricated residential buildings in socialist countries (1954-1970): methodological criteria and social perspectives. TEMA, 5(1), 1-13. https://doi.org/10.17410/tema.v5i1.210
Bertolazzi, A., Giannetti, I. (2024). Architettura industrializzata a Milano. Prototipi e modelli per l’edilizia residenziale pubblica (1945-1965). Franco Angeli, Milano.
Bertolazzi, A., Giannetti, I., Vendetti, E. (2025). Philological HBIM for Knowledge, Management, and Valorisation of the Industrialized Building: The Case of Prefabricated Large Panels Systems (1950–80). In: R. Corrao et al. (eds), Colloqui.AT.e 2024, LNCE 610. https://doi.org/10.1007/978-3-031-71855-7_6
Castellano-Román, M., Pinto-Puerto, F. (2019). Dimensions and Levels of Knowledge in Heritage Building Information Modelling, HBIM: The model of the Charterhouse of Jerez (Cádiz, Spain). Digital Applications in Archaeology and Cultural Heritage, 14: e00110. https://doi.org/10.1016/j.daach.2019.e00110
Cirone, D., Bruno, R., Bevilacqua, P., Perrella, S., Arcuri, N. (2022) Techno-Economic Analysis of an Energy Community Based on PV and Electric Storage Systems in a Small Mountain Locality of South Italy: A Case Study. Sustainability, 14(21), 13877. https://doi.org/10.3390/su142113877
Gestione case per lavoratori (1965). Norme tecniche di esecuzione delle costruzioni, con speciale riferimento alla progettazione. Gescal, Roma.
Giannetti, I., Mornati, S. (2022). Preserving the 20th Century industrialized building heritage in Italy: combining historical surveys and philological BIM. In Y.B. Haydee Blanco (eds), REHABEND 2022 Construction pathology, rehabilitation technology and heritage management. Círculo Rojo, Almeria.
Giannetti, I., Mornati, S. (2023). Compressed-air foundations in Italy: HBIM-aided study of the Tiber River embankments (1876-1900). TEMA, 9(2), 6-18. https://doi.org/10.30682/tema090005
Gonzalez-Libreros, J.H., Bertolazzi, A., Turrini, U., Pellegrino, C. (2020). Assessment of an Existing Reinforced-Concrete Prefabricated Building: The Case of the Procédé Camus. Journal of Architectural Engineering, 26(6). https://doi.org/10.1061/(ASCE)AE.1943-5568.0000421
Graf, F., Delemontey, Y. (eds) (2012). Architecture industrialisée et préfabriquée: connaissance et sauvegarde. Presses polytechniques et universitaires romandes, Losanna.
Iori, T. (2012). Préfabrication et industrialisation made in Italy. In: F. Graf, Y. Delemontey (eds), Architecture industrialisée et préfabriquée: connaissance et sauvegarde. Presses polytechniques et universitaires romandes, Losanna.
ISPRA (2024). Report n.339/2024 “Le emissioni di gas serra in Italia. Obiettivi di riduzione al 2030”.
Nicoletti, F. Cucumo, M.A., Arcuri, N. (2022). Cost optimal sizing of photovoltaic-battery system and air–water heat pump in the Mediterranean area. Energy Conversion and Management, 270, 116274. https://doi.org/10.1016/J.ENCONMAN.2022.116274
Nicoletti, F., Ramundo, G., Arcuri, N. (2025) Optimal operating strategy of hybrid heat pump - boiler systems with photovoltaics and battery storage. Energy Conversion and Management, 323, 119233. https://doi.org/10.1016/J.ENCONMAN.2024.119233
Perrella, S., Bisegna, F., Bevilacqua, P., Cirone, D., Bruno, R. (2024). Solar-Assisted Heat Pump with Electric and Thermal Storage: The Role of Appropriate Control Strategies for the Exploitation of the Solar Source. Buildings, 14(1), 296. https://doi.org/10.3390/buildings14010296
Pocobelli, D.P., Boehm, J., Bryan, P., Still, J., Grau-Bové, J. (2018). BIM for heritage science: a review. Heritage Science, 6, 30. https://doi.org/10.1186/s40494-018-0191-4
Spada, F. (2024). SGI-Sogene e la prefabbricazione in Italia. Strategie, tecniche e realizzazioni d’impresa (1945-1977). Gangemi, Roma.
Talanti, A.M. (n.d.). L’industrializzazione edilizia in Italia. Vol. 2. A.I.P., Milano.
